Why Do you Looking for Pipe Freezing Services in Saudi Arabia and UAE - Eiwaa Group

 Eiwaa Group of Pipe Freezing services has been in service since 1994 and in the last several years it has stayed committed to high levels of service and delivery of efficient and cost effective solutions irrespective of the size of the project. The company owes its success to very high levels of technical expertise and professionalism that they employ to great effect in every commission.


And, following closely on its commitments is the technology that they deploy to accomplish their projects. As we have mentioned elsewhere about the applicability of the process of Line Stopping, there are very few industries in the world that use pipes which can’t be serviced with Line Stopping. Line Stopping and the processes that are used therein is perfect for a wide range of materials, viz: Carbon Steel, Stainless Steel, Cast / Ductile Iron, Pressurised Concrete Cylinder Pipe, Reinforced Concrete Pipe, Alloys, PVC & Polyethylene to name a few.


Eiwaa Group Pipe Freezing services will perform a thorough review of your specific hot tapping application by an experienced and qualified technician to ensure a safe and successful implementation in the field. The process starts with a valve which is mounted to the hot tap fitting outlet and the assembly is pressure tested prior to performing the operation. When done, the engineer will drill or bore an opening into the pressurized system, without shut-down, or spilling of the content inside, when everything has been done, the equipment are withdrawn and the valve is closed – thereby completing the process.


Pipe Freezing Services: Pipe freezing is a method of liquid nitrogen applied in the outer surface of pipes to lower the temperature of pipes .When the temperature of pipes lower than the pipe fluid below its freezing point, create a freeze plug capable to withholding pressure up to 4000psi.Pipeline freezing is used for valve/pump replacement, pressure testing and HVAC System maintenance etc.Pipe freezing is ideal for pipes varies from ½’to 30 “.Pipe freezing services are used for Refineries,Petrochemical plants,Transmission pipeline,Power Generation,Fire Protection system,office Buildings,Hospitals,Schools etc.Typical pipe freezing holding time are for ½’pipe freezing ,it is 6 minutes;Pipe freezing for 6” pipes,it is 48 minutes,pipe freezing holding time for 8”pipe is 90 minutes,Pipe freezing time for 12’”pipe is 3 hours,Pipe freezing holding time for 20”pipe is 4 hours etc. Fluid Capabilities in pipe freezing services are water,sewage,oil,glycol,brine etc.Benefits of pipe freezing services are eliminates needs for bulk fluid transfer or storage,eliminates need for draining down system, and venting procedures,enhances safety while working on lines containing hazardous liquids.


API 510 – Pressure Vessel Inspection and Evaluation


Boilers and pressure vessels are used all over the world in different industries including oil and gas and energy industries. In order to ensure safety and operational efficiency of pressure vessel equipment, certain regulations and codes have been developed, some of which require independent inspection and certification to achieve compliance. EIWAA provides Pressure Testing Services  and piping inspection surveys to ensure that statutory inspections and remaining life assessments are conducted, and equipment continues to remain safe to use.


Our Capabilities:


• Engineering Evaluations.

• Mechanical Integrity.

• Thickness Inspections.

• Fitness for Service Evaluations (FFS).

• Corrosion Rate and Remaining Life Determination.

• Turnkey Management Program.

• Jurisdictional State Special Evaluations.


API 570 Piping Inspection and Evaluation


In many situations, it is not possible to find out the surface area of a given asset, such as a pipeline or a heat exchanger. Where the mode of damage is pitting corrosion, we provide a range of services to obtain required information for confident life assessment.


For more details visit our website: https://eiwaagroup.com/piping-and-hydro-testing-service-companies-uae/


Contact: +9715650 35752


Address: P.O. Box : 28346,  Abu dhabi, UAE


Facebook: https://www.facebook.com/eiwaagroup/


Instagram: https://www.instagram.com/eiwaagroup/
Location: United Arab Emirates

Comments

Post a Comment

Popular posts from this blog

Are You Looking for ADNOC Approved Third-party Inspection company and Zone Certification in Saudi Arabia and UAE ?

Image
      EIWAA Group offers a complete range of Third-party inspection services including mechanical and electrical Inspections. Third Party Inspection Services of Mechanical Inspection covers Surveillance, Mill Inspections, Welding and Painting Inspections, NDT Inspection Services, Offshore Coating Inspections, Up gradation of mill test certificates from EN 10204 3.1 to 3.2, Performance and Certification of Pressure test (Hydro test and Pneumatic Test). Our Third-Party Inspection starts from Design review, Material Inspection, Quality assurance services, in line inspection and Random inspection, Dimensional Inspection, Stage wise fit up inspection and FAT/PAT test etc. Third Party Inspection of mechanical equipment’s (Non electrical equipment) including zone certification of equipment .Third Party Inspection of Electrical components which needs zone 0,zone 1 and zone 2 certifications also covers under the scope of third party Inspection team. Third Party Inspection (Mechani...
Read more

Are you looking for Eddy Current Testing - Eiwaa Group

Image
Eiwaa Group of  Eddy Current Testing system was specially developed for quality testing and process monitoring of long products. From hot testing to all bright steel processing steps, the surfaces of semi-finished products made from austenitic, (non) ferromagnetic metals can be tested for defects. The system operates in a contactless and non-destructive manner in accordance with the Eddy Current Testing method and is used for detecting short defects, such as holes or localized defects and transverse defects.  The systems detect defective materials fully automatically and reliably. Defects can be marked, classified, and automatically discarded. The test speed of up to 150 m/s facilitates 100% testing, even at high production speeds. The systems benefit from low operating costs and frugal energy consumption as well as low maintenance costs, few wear parts, and low use of materials. Eddy Current Testing :  It is based on the principle of generating circular electric curre...
Read more

Best Eddy Current Testing in Saudi and UAE - Eiwaa Group

Image
Eddy Current Inspection is one of several NDT methods using the principle of electromagnetism to conduct examinations. Other methods, such as remote field testing (RFT), flux leakage also use this principle. Eddy Current Testing is completed through a process called electromagnetic induction. When alternating current is applied to the conductor, such as copper wire, a magnetic field develops in and around the conductor. This magnetic field expands as the alternating current rises to maximum and then collapses as the current is reduced to zero. When another electrical conductor is positioned in close proximity with this changing magnetic field, current will be induced into this second conductor. Eddy currents are induced electrical currents that flow in a circular path. Current testing takes its name from Eddies, which are formed when a liquid or gas flows in a circular path around obstacles under the right conditions. ID probes, also referred to as Bobbin probes or feed-through pr...
Read more